Welltech SIPPBX 6200A - Manual (Page 68)

Next/Prev Click on the Next/Prev to Next/Previous Page. The system will
auto display the Next or Previous Information.
Click Add/Modify. The screen appears as shown.
Figure Configuration: Dial Group Setting
The following table describes the table in this screen
Table Configuration: Dial Group Setting
Label Description
Group Number Enter the Group Number. The Group number should NOT be the
same with Extension, Trunk Number, and Speed Dial Number.
All of the Numbers should be unique for SIPPBX 6200A system.
Telephone Number Enter the Telephone Number to join this Dial Group. You can
input multiple members by a “comma”, such as [101,102,103]
Ring Type You can choose the Ring type for Dial Group; Ring All,
Sequential Ring and Random Ring.
Dial Group End To You can decide the final destination if no one of group
answered. You can select IVR, EXT Voice Mail or a Number
(extension or PSTN number…, etc).
Apply Click on the Apply button to save your customized settings and
exit this screen.
Cancel Click on the Cancel button to begin configuration this screen
afresh.
- 68 -