Welltech SIPPBX 6200A - Manual (Page 19)

2.1.3 Trunk Configuration
User has to set Trunk account for Trunk (FXO device, for instance, WellGate 2540 or 2680 )
to register to SIPPBX 6200A or set some necessary configuration for SIP trunk.
To change your Trunk, click Configuration, and then click the Trunk table. The screen
appears as follows.
Figure Configuration: Trunk
The following table describes the table in this screen
Table Configuration:
Trunk
Label Description
Select Select this check box and modify or delete it.
Trunk Number This field shows the Trunk Number information.
Comment This field shows the remark information.
NAT Traversal This field shows the NAT Traversal information.
Maximum Channels This field shows the Maximum concurrent call to this trunk.
There is no limitation if this field left blank.
Add Click on the Add button to display a new Trunk Setting screen.
Modify A Trunk can be modified by clicking on the checkbox next to the
Trunk and click on the Modify button to modify its contents.
Delete A Trunk record can be deleted by clicking on the checkbox next
to that Trunk and click on the Delete button.
Total Count This field shows Total Counts of trunk information.
Number Search Enter the search number, then click enter key. The screen will
display matched search data.
Total Page This field shows Total Pages of trunk information.
- 19 -