Welltech SIPPBX 6200A - Manual (Page 89)

3.4.2 SMTP Setting
SIPPBX 6200A supports Voice Mail to e-mail. Before activating this feature, you should
give the SIPPBX 6200A an e-mail account and set the SMTP for SIPPBX 6200A, so that the
SIPPBX 6200A has the ability to send the left voice message to the subscriber’s mail box.
To change your SMTP Setting, click Management, and then click the SMTP Setting table.
The screen appears as shown.
Figure Management: SMTP Setting
The following table describes the table in this screen
Table Management: SMTP Setting
Label Description
Mail Address Enter the IP address or URL for SIPPBX 6200A.
SMTP server Enter the IP address or URL for your SMTP server. Check with
your Email administrator if you are not sure of this information.
Account Enter your account.
Password Enter the password assigned to you.
SMTP Server Auth. Select the Enable option if your use SMTP Server Auth. The
default is Disable
Apply Click on the Apply button to save your customized settings and
exit this screen.
Cancel Click on the Cancel button to begin configuration this screen
afresh.
- 89 -