Welltech SIPPBX 6200A - Manual (Page 62)

you enable Fixed Outgoing call Rule for a certain route record,
such as 8 with length 10. When 101 call a number 8xxxxxxxxx,
the SIPPBX 6200A will route this call to 888 no matter what
Primary Destination you set for such route record.
Note: For more information about Fixed Trunk ID, please refer
to the user manual: CH3.1.4 Extension.
Route Timeout Enable this field will make this route record initial Timeout
function.
Route Level You can define the Route Level for such route record. For
example, you define a route record with prefix 0 and the Route
Level to R3. That means only the subscriber with Dial Plan
[ext+R123] and [ext+allroutes] can use such record due to
only these two Dial Plan contain the Route Level of R3.
Apply Click on the Apply button to save your customized settings and
exit this screen.
Cancel Click on the Cancel button to begin configuration this screen
afresh.
Example 2: Routing record with prefix 2 and Digits Length is 8. Enable Route Guest Allow
and Add function.
Click Add/Modify. The screen appears as shown.
Figure Configuration: Outgoing Call Routing
- 62 -