6 trunk – Welltech SIPPBX 6200A User Manual
Page 51

3.1.6 Trunk
User has to set Trunk account for Trunk (FXO device, e.g. WellGate 2540 or 2680) to
register to SIPPBX 6200A or set some necessary configuration for SIP trunk.
To change your Trunk, click Configuration, and then click the Trunk table. The screen
appears as shown below.
Figure Configuration: Trunk
The following table describes the table in this screen
Table Configuration:
Trunk
Label
Description
Select
Select this check box, then modify or delete it.
Trunk Number
This field shows the Trunk Number information
Comment
This field shows the Comment information
NAT Traversal
This field shows the NAT Traversal information
Maximum Channels
This field shows the Maximum Channels information
Add
Click on the Add button, then display Trunk Setting screen.
Modify
A Trunk Number can be modified by clicking on the checkbox
next to the Trunk Number and click on the Modify button.
Delete
A Trunk Number can be deleted by clicking on the checkbox
next to the Trunk Number and click on the Delete button.
Total Count
This field shows Total Count information.
Number Search
Enter the search number, then click enter key. The screen will
display matched search data.
Total Page
This field shows Total Page information.
Page
This field shows Page Number information. You can Enter page
- 51 -