beautypg.com

Welltech SIPPBX 6200A User Manual

Page 12

background image

- 12 -

Primary DNS

Enter the IP address for Primary DNS. The default is
168.95.1.1.

Secondary DNS

Enter the IP address for Secondary DNS. The default is null.

Default Gateway
Backup

Select Enable option, if there are any connection problem
occurred on primary default gateway connections, all the traffic
will be guided and switched to the secondary default gateway
for proper operation. The default is Disable.

Secondary Default
Gateway

Enter the Secondary Default Gateway. If you choose the
Default Gateway Backup to Enable.

Check Point

Enter the Check Point IP address If you choose the Default
Gateway Backup to Enable. SIPPBX 6200A use the ping
command to PING this IP address in order to check if there are
any connection problem occurred on primary default gateway
connections.

Current used Default
Gateway

This field display existing used Default Gateway IP address.

PPPoE ID

Enter the PPPoE ID. If you choose the Mode to PPPoE.

PPPoE PWD

Enter the PPPoE Password If you choose the Mode to PPPoE.

IPV6 Mode

Select Manual option. You can enter IP Address, Prefix Length
and Gateway address.

IPV6 IP Address

Display the IPV6 IP Address. You can enter the IPV6 IP Address,
if you choose the IPV6 mode to Manual.

IPV6 Prefix Length

Display the IPV6 Prefix Length. You can enter the IPV6 IP
Address, if you choose the IPV6 mode to Manual.

IPV6 IP Gateway

Display the IPV6 Default Gateway Address. You can enter the
IPV6 Default Gateway Address, if you choose the IPV6 mode to
Manual.

MAC

This field shows the MAC address. The Mac address cannot be
modified.

LAN (IPV4)

IP Address

Enter the IP Address. The default is 192.168.123.123.

Subnet Mask

Enter the Subnet Mask Address. The default is 255.255.255.0.

MAC

This field shows the MAC address. The Mac address cannot be
modified.

Network Routing Table (IPV4)

Select

Select this check box, then modify or delete it.

Destination This

field

shows the IP address.

Network

This field shows the Subnet Mask address.

Gateway

This field shows the Default Gateway address.