Wavetronix SmartSensor Matrix (SS-225) - User Guide - Manual (Page 72)

CHAPTER 7 • LANES & STOP BARS 71
Figure 7.6 – Capture Window
Note
If a stop bar is found for a lane during the auto-configuration process, it will be cap-
tured with the lane.
Menu Bar
The menu bar at the bottom of the screen allows you to perform a variety of operations
during sensor configuration. Click the button at the right side of the menu bar to open
a window that shows descriptions for the various menu icons (see Figure 7.7).
Figure 7.7 – Sensor Setup Menu Window
The Menu Bar contains the following options:
˽ To Main Menu – Returns you to the main menu.
˽ Save Config – Saves the lanes and stop bars to the sensor.
˽ Undo Last Edit – Undoes the last change in the edit area.
˽ Clear Edit Area – Deletes all lanes from the edit area.
˽ Move Sensor – Moves the sensor to a different corner of the edit area and rotates the
view accordingly.
˽ Restart/Reboot – Gives you the option to restart automatic configuration or reboot
the sensor.
˽ Edit Thresholds – Allows you to edit the sensor’s thresholds.
˽ Pause Traffic – Suspends or resumes movement of vehicle tracks on the screen.