Wavetronix SmartSensor Matrix (SS-225) - User Guide - Manual (Page 30)

In this chapter
˽ Using the Click 112/114 DIP Switches
˽ Using the Click 104 Rotary Switch
˽ Attaching and Programming the Click 112/114
˽ Attaching and Programming the Click 104
˽ Channel Mapping
3
As mentioned in the previous chapter, in many instances the SmartSensor Matrix will com-
municate with the controller via contact closure devices—generally the Click 112/114 cards,
but sometimes the Click 104 DIN rail module (see Figure 3.1). This chapter will discuss how
to use these devices in an installation.
Figure 3.1 – Click 104 (left) and Click 112/114 (right)
Contact Closure Communication
3