Mounting the backplate, Connecting ac power – Wavetronix SmartSensor Matrix (SS-225) - User Guide User Manual
Page 106
APPENDIX
105
Figure D.1 – Intersection Preassembled Backplate
Mounting the Backplate
Use the following steps to mount the backplate in the traffic cabinet:
1 Locate the area planned for mounting the backplate. The backplate can usually be
mounted on the side panel of a NEMA-style cabinet.
2 Attach the backplate with the U-channel mounting screws.
Note
If you have a 330 series (170/2070 style cabinet) with a 19-inch EIA rack, please con-
tact Wavetronix Technical Services for assistance. Wavetronix can provide modified
backplates that attach to a 19-inch rack.
Connecting AC Power
Since SmartSensor Matrix operates on 10–28 VDC, the standard preassembled backplates
provide an AC power conversion option. The backplate includes an AC to DC power con-
verter, power surge and circuit breaker.