Export – Wavetronix SmartSensor 105 (SS-105) - User Guide User Manual

Page 80

CHAPTER 7 • DATA COLLECTION

export logs into 3 Card format.

Selecting New and then the type of log—Download, Interval or Event—opens a direc-

tory box where you can create a new log. This file will then be used to log data. If you cre-

ated an event log, going to View > Traffic (Event) Data and turning logging on will fill the

log. If you created an interval log, going to View > Interval Data and turning logging on

will fill the log. If you created a download log, going to Data Collection > Download and

downloading data will fill the log.

Note

If you haven’t created a log file when you go to start logging, the program will prompt
you to create one then.

Selecting Open and then the type of log will open the most recently used log in a text edi-

tor such as Notebook.

Note

You can also open event and interval logs by going to

View > Traffic (Event) Data or

View > Interval Data and clicking the View Log button; you can view download logs by

selecting the

View data file when this window is closed button after downloading.

Export

Select File > Data Logs . . . > Export to export an interval log or download log to another

file format (see Figure 7.4).