Wavetronix SmartSensor 105 (SS-105) - User Guide - Manual (Page 12)

In this chapter
˽ Selecting the Offset and Mounting Height
˽ Attaching the Mount Bracket to the Pole
˽ Attaching the Sensor to the Mount Bracket
˽ Aligning the Sensor to the Roadway
˽ Applying Silicon Dielectric Compound
˽ Connecting the SmartSensor Cable
1
Installing the SmartSensor 105 is quick and easy. Once installed, the SmartSensor requires
little or no on-site maintenance. This chapter will describe the installation process, includ-
ing how to attach the sensor to the pole and how to correctly align the sensor.
Selecting the Offset and Mounting Height
After selecting a mounting location within the recommended range of offsets (see intro-
duction), use Table 1.1 to select a mounting height. See Figure 1.1 for an illustration of
what is meant by offset and mounting height.
Installing the SmartSensor 105
1