Wavetronix SmartSensor 105 (SS-105) - User Guide - Manual (Page 6)

In this chapter
˽ SmartSensor Package
˽ Selecting a Mounting Location
The Wavetronix SmartSensor 105 utilizes patented Digital Wave Radar™ technology to
detect lane occupancy, traffic volume and average speed in up to eight lanes of traffic simul-
taneously. Classified as Frequency Modulated Continuous Wave (FMCW) radar, Smart-
Sensor collects data using a 10.525 GHz (X-band) operating radio frequency.
The installation and configuration process is quick and easy. Once installed, SmartSensor
configures automatically, requires little or no on-site maintenance and may be remotely re-
configured. This user guide provides the step-by-step process for installing and configuring
the SmartSensor, including mounting and alignment guidelines and instructions for both
automatic and manual sensor configurations. Any questions about the information in this
guide should be directed to Wavetronix or your distributor.
Caution
Do not attempt to service or repair this unit. This unit does not contain any compo-
nents and/or parts serviceable in the field. Any attempt to open this unit, except
as expressly written and directed by Wavetronix, will void the customer warranty.
Wavetronix is not liable for any bodily harm or damage caused if service is attempted
or if the back cover of the SmartSensor unit is opened. Refer all service questions to
Wavetronix or an authorized distributor.
Introduction