Wavetronix SmartSensor 105 (SS-105) - User Guide - Manual (Page 57)

56 CHAPTER 5 • SENSOR SETTINGS
Note
Using the Save to File function does not save the changes to your sensor. If you want
to update and then back up your sensor, you need to use both Save to File and Save
to Sensor.
˽ Open from File – Restores settings from an existing .ssc file. Once the settings have
been restored, you must click Save to Sensor if you want the sensor updated with the
restored settings.
Note
Return to this page to back up your sensor after you’ve completed the steps to con-
figure your lanes and data collection.
Sensor Date & Time
To ensure that the data collected is timestamped correctly, use the Sensor Date & Time
screen, located at Edit > Sensor Date & Time (see Figure 5.5).
Change the date by selecting the correct date from the drop-down lists (month, day, and
year) or use the calendar to scroll to the correct date. Change the time by selecting the cor-
rect time (hour, minutes, and seconds) from the drop-down lists.
Click the check box below the calendar to automatically adjust for local computer time and
daylight savings time settings. The check box at the bottom of the page will automatically
synchronize sensor to PC UTC time at a certain interval you can define in the text field.