Verilink WANsuite 5330 (34-00302.F) Product Manual - Manual (Page 82)

4-4 W A N s u i t e 5 3 3 0
Figure 4.3 VT100 System Screen
The System screen displays the fields shown in the table below.
NOTICE: Remember that passwords are case-sensitive and are limited to
no more than 10 characters. When logging on, password must be
entered exactly as it was programmed.
The System screen displays the user-selectable prompts listed in the table
below.
Field Description
Contact Read/write field used to store the name of a point-of-contact for
system failure.
Name Read/write field that holds the unit’s name.
Location Read/write field that holds the unit's location.
FrameStart ID Read/write field that holds the unit's ID that uniquely identifies the
unit and is used in the FrameStart applications.
Blank Fields Read/write fields for user-specific labels and values. Information
resides in non-volatile memory.
Time Read/write field that holds the unit's internal time setting in
standard 24-hour HH:MM:SS format.
Date Read/write field that holds the unit’s internal time setting in
standard MM:DD:YY format.
New Password Lets you modify your password by typing in a new password.
Acceptable characters for use in a password are digits 0–9 and
letters A–Z and a–z, for a total of 62 distinct characters.
Prompt Function
Maintenance Resets Brings up a screen where you can reset unit to its default TDM,
Packet, or Packet 4 configuration.
Save and Restart Saves the current configuration and restarts.