Verilink WANsuite 5330 (34-00302.F) Product Manual - Manual (Page 100)

4-22 W A N s u i t e 5 3 3 0
ACCM The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–4294967295
Default: 4294967295
MRU This configuration option may be set to inform the peer that the
implementation can receive larger packets, or to request that the peer send
smaller packets.
Values: 128–4096
Default: 1500
Port IP Address The IP address of the port. For unnumbered PPP link, set to 0.0.0.0 and set IP
Address Negotiation to “No.”
Default: 192.168.1.2
Peer IP Address Enter the IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP Over Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.
Values: 0
−
3600
Default: 0 (disabled)
Allow PAP Allows the peer to negotiate for PAP.
Values: No, Yes
Default: No
Allow CHAP Allows the peer to negotiate for CHAP.
Values: No, Yes
Default: No
PAP Username This field is used to log on to the peer. Type the appropriate PAP Username
in this field.
Values: User established
Default: Username
PAP Password This field is used to enter the password necessary to log on to the peer under
a given PAP Username.
Values: User established
Default: None
CHAP Username This field is used (along with the CHAP Secret) to challenge the peer. Type
the appropriate CHAP Hostname in this field.
Values: User established
Default: Hostname