Figure 3-1 – Verilink QUAD T1 (880-503345-001) Product Manual User Manual

Page 29

Configuration

Verilink QUAD T1 User Manual

3-3

Figure 3-1 SCM Main Menu

Select QUAD T1

Module

When you log in to an SCM controller, the SCM module is selected.
Square brackets indicate the currently selected module

[*S]

[*S]. The

prompt line also indicates which module is selected.

A [0.0.0.2] [1,1] SCM >

A [0.0.0.2] [1,1] SCM >
Use the

S) shelf/slot

command to navigate to another module.

Type “S” and press E

NTER

. At the prompt, type the number of a slot

where the desired QUAD T1 module resides (shelf 1, slots 3 or 4 in
the node shown in

Figure 3-1

) and press E

NTER

-- VERILINK SCM CONTROLLER : FW Rev 1.18, Aug 24 1998 20:04:56 --

Site name: SCM Tutorial Access level: 2

Site name: SCM Tutorial Access level: 2
Managing at NEAR end node [0.0.0.2] Node id: 122

Managing at NEAR end node [0.0.0.2] Node id: 122

<- SLOT ->

<- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -
1 M [*S] D Q Q I M H - - - - - -

1 M [*S] D Q Q I M H - - - - - -

1 M [*S] D Q Q I M H - - - - - -
2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -
KEY: D=QUAD D, I=IMUX, M=M13, Q=QUAD T1, S=SCM

KEY: D=QUAD D, I=IMUX, M=M13, Q=QUAD T1, S=SCM

S) shelf/slot O) administration

S) shelf/slot O) administration
C) configuration D) diagnostics

C) configuration D) diagnostics

C) configuration D) diagnostics
P) performance/status A) alarm

P) performance/status A) alarm

P) performance/status A) alarm
B) circuit manager I) manufacturing info

B) circuit manager I) manufacturing info

B) circuit manager I) manufacturing info
X) logoff

X) logoff

A [0.0.0.2] [1,1] SCM >