Verilink QUAD T1 (880-503345-001) Product Manual User Manual

Page 19

Quick Set-Up

Verilink QUAD T1 User Manual

2-5

the QUAD T1 module in slot 3. With

Auto Restore

Auto Restore set to yes

yes

yes, the

shelf will revert to the primary (T3) source once it recovers
from an outage.

Figure 2-4 Timing Menu

7. This completes the port configuration for this module. Exit to

the Main Menu by typing "X" twice.

Configure Slot 4

8. Use the "S" command to select shelf 1, slot 4—the other QUAD

T1 module.

9. Type "C" to access the Configuration Menu. See

NOTE: The line build out field is available for all four ports on this

module, and

n/a

n/a is shown for equalization. This is because

this module has been fitted with a CIM 3064 rear connector

module which provides 4 DS-1 ports.

-- QUAD T1 CONFIGURATION MENU (TIMING OPTIONS)--

R) receive clock from shelf: yes

Current shelf timing source: card 6, network (primary)

Source Slot Number Synchronization Auto Restore

Primary PC) 6 PS) network PA) yes

Primary PC) 6 PS) network PA) yes
Secondary SC) 3 SS) net 1 SA) yes

Secondary SC) 3 SS) net 1 SA) yes

Secondary SC) 3 SS) net 1 SA) yes
Tertiary TC) 4 TS) net 1 TA) yes

Tertiary TC) 4 TS) net 1 TA) yes

X) exit this menu

A [0.0.0.2] [1,3] QUAD T1 >