Verilink QUAD T1 (880-503345-001) Product Manual - Manual (Page 23)

Quick Set-Up
Verilink QUAD T1 User Manual 2-9
Figure 2-9 Add Circuit Menu—M1-3 Selected
6. Type "DT" and select T1 number 6. Then type "DM" and select
all 24 DS0s of that T1.
7. Type "SM" and select all 24 DS0s of the QUAD T1 port 3.
8. Type "S" to setup the circuit.
9. Type "X" to return to the Circuit Manager Menu.
4 T1 Ports to 1
IMUX Port
The third part of this example configuration consists of four T1
circuits which will share a common connection to the data port of
the IMUX module in slot 5. After creating one circuit, the remaining
circuits will be "cloned".
1. While still at the Circuit Manager Menu, type "A" to add
another circuit.
2. Type "N" to name the circuit and use "IMUX_T11".
3. Type "M" and set the mode to 64K per timeslot.
4. Type "SP" and use "1,5" to select the IMUX module. Since the
IMUX has only one port, no port selection prompt is presented.
5. Type "DP" and use "1,4" to select the second QUAD T1 module.
At the port selection prompt choose port 1.
6. Type "DM" and select all 24 timeslots by typing "1-24".
7. Type "S" to setup the circuit, then type "X" to return to the
Circuit Manager Menu. A list of all the circuits is displayed at
the top of the menu, as in
Figure 2-10 .
-- ADD CIRCUIT MENU [1,1] SCM Firmware 1.18 -- -- ADD CIRCUIT MENU [1,1] SCM Firmware 1.18 -- -- ADD CIRCUIT MENU [1,1] SCM Firmware 1.18 -- -- ADD CIRCUIT MENU [1,1] SCM Firmware 1.18 --
N) name: PBX_M13 M) mode: voice N) name: PBX_M13 M) mode: voice N) name: PBX_M13 M) mode: voice N) name: PBX_M13 M) mode: voice
SP) src port: [1, 3] QUAD net3 DP) dst port: [1, 6] M1-3 m13 SP) src port: [1, 3] QUAD net3 DP) dst port: [1, 6] M1-3 m13 SP) src port: [1, 3] QUAD net3 DP) dst port: [1, 6] M1-3 m13 SP) src port: [1, 3] QUAD net3 DP) dst port: [1, 6] M1-3 m13
SM) -- DS0 map selection -- DM) -- DS0 map selection --
SM) -- DS0 map selection -- DM) -- DS0 map selection -- SM) -- DS0 map selection -- DM) -- DS0 map selection -- SM) -- DS0 map selection -- DM) -- DS0 map selection --
.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
DT) T1 chnl No. (undefined)
DT) T1 chnl No. (undefined) DT) T1 chnl No. (undefined) DT) T1 chnl No. (undefined)
bus: AUT ->-->>->> Circuit Inactive <<-<<--<- bus: AUT ->-->>->> Circuit Inactive <<-<<--<- bus: AUT ->-->>->> Circuit Inactive <<-<<--<- bus: AUT ->-->>->> Circuit Inactive <<-<<--<-
S) setup X) exit S) setup X) exit S) setup X) exit S) setup X) exit
A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 >