Ll detect, Rl detect, Alarm on dtr loss – Verilink PRISM 3060-10 (34-00252.4) Product Manual User Manual
Page 69: Dds status screen, Slot-dsu, Revs, A = net alarm, B = dte alarm, Ll detect rl detect alarm on dtr loss, Slot- dsu

DDS Status Screen
61
LL Detect
This field allows selecting whether the DSU MP responds to the Local Loop lead
on the DTE connector. When the DTE device changes the state of this lead, the
DSU MP initiates a local loopback. The default setting is disable.
RL Detect
This field allows selecting whether the DSU MP responds to the Remote Loop lead
on the DTE connector. When the DTE device changes the state of this lead, the
DSU MP initiates a remote loopback. The default setting is disable.
Alarm on DTR Loss
Selecting Enable allows the unit to go into alarm on loss of DTR. The default
setting is Disable.
DDS
Status
Screen
The DDS Near and Far Status screen (Figure 4-17) allows viewing the status of
every slot and DSU combination for the far-end equipment.
Slot-DSU
REVs
This field shows the revision number of the near DSU MP card in each slot. The
unit continously polls the card and reads this number.
a = Net Alarm
Alarm on the network. Alarms for the unit include ASC, FDL and LOS. Alarms
for the 41TDM include FDL, LOS, OOF, and OOS.
b = DTE Alarm
Alarm on the DTE. It is either a loss of DTR on DTE-A or DTE-B.
3060 DSU x.xx/x.xx
P R I S M 3060 - 10
Date: MM/DD/YY
No Far End Response TXPORT Prism 3060-10
Time: HH:MM:SS
-----------------------------------DDS STATUS----------------------------------
NEAR 3-1: -------- 4-1: -------- 5-1: -------- 6-1: --------
3-2: -------- 4-2: -------- 5-2: -------- 6-2: --------
3-3: -------- 4-3: -------- 5-3: -------- 6-3: --------
3-4: -------- 4-4: -------- 5-4: -------- 6-4: --------
3-5: -------- 4-5: -------- 5-5: -------- 6-5: --------
3-6: -------- 4-6: -------- 5-6: -------- 6-6: --------
REVs -------- REVs -------- REVs -------- REVs --------
FAR 3-1: -------- 4-1: -------- 5-1: -------- 6-1: --------
3-2: -------- 4-2: -------- 5-2: -------- 6-2: --------
3-3: -------- 4-3: -------- 5-3: -------- 6-3: --------
3-4: -------- 4-4: -------- 5-4: -------- 6-4: --------
3-5: -------- 4-5: -------- 5-5: -------- 6-5: --------
3-6: -------- 4-6: -------- 5-6: -------- 6-6: --------
Key: a=Net Alarm c=Net Loop e=Download Needed g=Loop Detected
b=DTE Alarm d=DTE Loop f=Dial Backup Active h=Test Active
---------------------------------------Messages--------------------------------------
NET ALARM
Local Screen
Figure 4-17 DDS Far Status Screen