Verilink PRISM 3060-10 (34-00252.4) Product Manual - Manual (Page 46)

38 T ERMINAL O PERATION
Password screen (page 36), enter the correct password to obtain access to any
other menu. Note that the password is case-sensitive.
Cursor
Controls
The terminal interface uses a highlighted cursor to select from menus and fields
within screens. The cursor is moved in different ways, depending on the terminal
emulation program used. Most programs allow use of the tab and shift+tab keys.
Others allow use of the four arrow keys. Once a field is highlighted, it is
manipulated as described in Field Types.
For keyboards without these standard keys or only some of them, an alternate set
of cursor control commands is provided. Each command is performed by pressing
a letter key while holding down the Control key. Alternate commands may be
freely mixed with the keyboard commands at the user’s discretion.
3060 DSU x.xx/x.xx PRISM 3060 Date: MM/DD/YY
3060 DSU x.xx/x.xx TXPORT Prism 3060-10 Time: HH:MM:SS
-------------------------------------- MAIN ------------------------------------
Element: [ ]
Alarms
Performance
Maintenance
Configuration
DDS Status
Utilities
------------------------------------Messages------------------------------------
Local Screen
igure 4-2 Main Menu Screen
Table 4-1 Keyboard /Alternate Commands
Keyboard Command Alternate Command
Left arrow Control+ S
Right arrow Control+D
Up arrow Control+E
Down arrow Control+X
Backspace Control+H
Delete Control+Z