Verilink PRISM 3060-10 (34-00252.4) Product Manual - Manual (Page 10)

2 G ENERAL
✦ Individual DS0 assignment
✦ Simple setup and control through the 3060-10 front panel, user interface, or SNMP
through the TXPORT 8100A Site Controller
✦ Remote access to all configuration parameters
✦ Five-year product warranty
3060-10
Specifications
Network Interface Line Rate: 1.544 Mbps (± 50 ppm)
Line Framing: D4 or ESF
Line Code: AMI or B8ZS
Input Signal: 0 to -27 dB ALBO
Connection: RJ-48C jack, 100 W (±5%)
Output Signal: 3.0 V (
±
10%) base-peak into 100
Ω
with protection
Line Build Out: 0, -7.5, -15, -22.5 decibel attenuation
Transient Voltage: 1000 V protection, fused input and output
Jitter Control: per TR 62411 and T1.403
Timing Source: Internal, recovered line clock, external DTE, station clock
Ones Density: B8ZS,
Ν×56
bit stuffing, alternate fill; complies with TR 62411
Diagnostics Performance: Monitoring per TR 54016 and T1.403
Network Loops: Line loopback or payload loopback
Fractional Loop: Responds to in-band V.54 loop code
DTE Port Loops: Loop toward DTE or network
BERT: Multiple test patterns toward network or DTE ports
Alarms Activation: Programmable thresholds
Reporting: Call out on alarm (COA), NO /NC dry contacts,
8100A Site Manager, trap messages
Contact Ratings: 0.6 A at 125 VAC, 2.0 A at 30 VDC
Power 110 VAC: 0.60 A, 45 W, 153 BTU max
Mechanical Mounting: Desktop, horizontal rack, or wall mount
Dimensions: 17.5" W, 3.5" H, 12.5" D
Weight: 11 pounds