Verilink PRISM 3060-10 (34-00252.4) Product Manual - Manual (Page 13)

2
I
NSTALLATION
Introduction This chapter contains information and instructions required to prepare the
TXPORT PRISM 3060 -10 and 3010-400 for use. Included are initial inspection
procedures, mounting instructions, configuration guidelines, connection and
powering information.
The unit is shipped ready for desktop or horizontal rack mount use. Mounting
brackets are attached at the front edge of the unit. These may be removed for
desktop use.
The DSU MP requires the PRISM 3060 -10 to have software revision 2.64 or greater.
Contact TXPORT Inside Sales for software upgrade, if needed.
Safety Summary This manual contains information and warnings which must be followed by the
user to ensure safe operation and to retain the equipment in a safe condition.
WARNING: This sign denotes a potential hazard to the operator. It calls attention to a
procedure or practice which, if not correctly performed or adhered to, could result in
injury or loss of life. Do not proceed beyond a WARNING sign until the indicated conditions
are fully understood and met.
CAUTION: Option modules are susceptible to damage caused by static electricity.
Use ESD (electrostatic discharge) precautionary measures, such as wearing static
grounding straps and storing modules in the supplied antistatic bags.
Unpacking and
Inspection
This unit is carefully packaged to prevent damage in shipment. Upon receipt,
inspect the shipping container for damage. If the shipping container or cushioning
material is damaged, notify the carrier immediately and make a notation on the
delivery receipt that the container was damaged (if possible, obtain the signature
and name of the person making delivery). Retain the packaging material until the
contents of the shipment have been checked for completeness and the instrument
has been checked both mechanically and electrically.
If the contents of the shipment are incomplete or, if there is mechanical damage or
defect, notify TXPORT. If the shipping container is also damaged, or the
cushioning material shows signs of stress, notify the carrier of the damage as well
as TXPORT. Keep the shipping materials for the carrier’s inspection. TXPORT
will arrange for repair or replacement without waiting for a claim settlement.
Supplied
Materials The PRISM 3060 -10 is shipped from the factory with the following standard
equipment:
✦ Attached 19-inch mounting brackets
✍