Triplett RWC1000K/RWC1000NP User Manual
Page 8
6
Section III. RWC1000 Faceplate Descriptions.
RWC1000 REMOTE PROBE
The MAIN UNIT connects to any Cat 5/6, coax cable or 10,
100, or 1000 Base-T device and performs a host of tests
needed for their installation and repair. For certain tests, it
can be inserted inline between two LAN devices.
RWC1000 MAIN UNIT
Power and LCD backlighting
Press the recessed power button. To backlight the display,
press the SEL button during the opening screen. The
RWC1000 powers OFF if there is no activity for 10 minutes.
Cursor and SELECT buttons
Use the cursor buttons to select the function to be per-
formed. Press the SEL button to select the functions.
Main Unit Jacks
LEFT, COAX and RIGHT: Use the LEFT jack for UTP
TESTING. Use RIGHT jack for NETWORK TESTING.
Far end cable termination: The Remote Probe's
jack is used to terminate the far end of the cable
when the wire map test is conducted.
The Remote Probe performs 2 functions:
Tracing cables: Use it as an inductive probe to trace
cables with the tone generated by the Main Unit.
"Printer" port
Use to transfer stored testing data (up to 250 tests) to a PC.
Requires Excel
®
. USB data transfer cable included.
➊
➊
➋
➋
➌
➌
➍
➍
➎
➎
➐
➐
➏
➏