Triplett RWC1000K/RWC1000NP - Manual (Page 43)

41
USB port
USB micro B
plug
PC with Excel
and a USB port
RWC1000 with up to 250
stored readings
PRINTING FROM A PC
STEP 1: INSTALL THE RWC DRIVER ON PC: Run "install_driver.
exe" (found on the RWC software CD). This driver is needed for the
PC to talk to the RWC (ignore other drivers). The RWC does not
need to be connected to the PC for the driver to properly install.
STEP 2: TRANSFERRING TEST READINGS (RWC TO PC):
1) Connect the RWC to a USB port on your PC and turn the RWC ON.
2) Run the "RWC1000.xls" spreadsheet (found on the RWC software
CD). RWC1000.xls is itself an Excel spreadsheet that uses Excel's
built-in macros to transfer the test results to your PC. Run RWC1000.xls
directly from the CD or copy it to your hard drive. Follow the directions
on the Excel screen to transfer the readings from the RWC's Printer
Memory. 3) If you wish, print some or all of the tests (each test prints
on a separate sheet). Or email the fi le to your customer as proof of
test. 4) Save the fi le using Excel's File>"Save as". See the Readme.
doc fi le on the RWC software CD for more details.
Transfer the test readings from the Main Unit
to the PC using the supplied cable, driver and
software (requires Microsoft ® Excel ® )
PRINTING