Triplett RWC1000K/RWC1000NP - Manual (Page 34)

Press SAVE to either SAVE or NAME and SAVE the test. See
page 35 for instructions. Press EXIT to discard the results.
CAT 5/6 UTP Cable Testing / BASIC TEST UTP
32
12> 203' = = = <12
36> 203' = = = <36
45> 201' = = = <45
EXIT SAVE
78> 200' = = = <78
UTP Wire Map
A correct wire map
for a straight through
UTP cable.
UTP WIRE MAP: The wire map displays the pairing of the wires.
The map above indicates that the fi rst pair ("12>"), pins 1 and 2, is
203 feet long and terminates in pins 1 and 2 ("<12") on the far end
of the cable. If there were any problems, they would be displayed.
CA
T 5/6 UTP
12> 203'
36> 203'
45> 201'
78> 200'
EXIT MAP + TRACE
UTP pairs and length
are displayed. Select
MAP + TRACE for wire-
map and tones
LEDs
Remote Probe LEDs. The Remote Probe
needs to be connected only for a brief period.
Flashing LED(s) indicate the test is progressing.
A steady LED indicates the test is completed.
This saves you an extra trip to retrieve the
probe. If LED(s) continue to fl ash the cable,
the cable has a wiring problem. Disconnect
the probe and go to the Main Unit to see the
see the results.