Printing from a pc, Printing – Triplett RWC1000K/RWC1000NP User Manual

Page 45

Press the Import Readings button
next. It downloads data from the serial port speci-
fi ed in the drop down box. Press OK.

PRINTING FROM A PC

Microsoft Excel

Download from network

tester successful!

Error messages: If Excel says "Please select a serial port with
a network tester connected" or "No network testers found", com-
munication is not established with the RWC's USB port. First check
the connections; is the USB cable fi rmly connected; is Excel's macro
security set to low; and the RWC powered ON. For more help, see
README.DOC on the RWC software CD and the videos at www.
bytebros.com/bb_tester/tech_support/RWC1000_tech_support.htm. It
shows you the step-by-step installation procedure.

After the readings are
downloaded, press to
launch the spreadsheet.
If you wish to change
any NAMES that you
created, do it in this
opening screen. You can
wait until they are in the
spreadsheet but it is
quicker here.

Edit Report

Import Readings

PRINTING

Edit Report

Readings

Finish

Back

Select and change reading names below:

Rack 5 Jack 3
Rack 5 Jack 4
Rack 5 Jack 5
Room 18 Jack 1
Room 18 Jack 2
Room 18 Jack 2A
Room 18 Jack 2B

Reading #: Reading Name:

Room 18 Jack 1

The sequential number (1-250) automatically assigned by the
RWC1000 to each stored test will appear as "Reading: Cable#1,
Reading: Cable#2", etc. in the spreadsheet along with any custom
name that you created. The "Reading #" can only be modifi ed in the
spreadsheet. Note: The RWC1000 allows duplicate custom names
but when they are printed in Excel they will appear as "Jack A",
"Jack A (2)", "Jack A (3)", etc. unless you change the name here.