Network testing / monitor inline, Netw orks – Triplett RWC1000K/RWC1000NP User Manual

Page 53

Text mode
Original mode

UNPLUG ALL PORTS

EXIT

PLUG-IN 2 PORTS
PC =>LEFT PLUG
HUB=> RIGHT PLUG

EXIT

Network Testing / MONITOR INLINE

UNPLUG ALL PORTS.
When the RWC1000
senses that no ports are
connected to the tester, it
will begin.

PLUG IN 2 PORTS.
Plug in both devices
using the "LEFT" and
"RIGHT" sockets of the
RWC1000.

CAPABILITY SCREEN.
This screen (or similar)
appears as the RWC1000
monitors the devices.
When complete, the
RWC1000 will automati-
cally continue to the next
screen.

NETW

ORKS

12> 10M 100M FULL
GIGABIT FULL
36> 10M 100M FULL

EXIT

GIGABIT FULL

Screen-by-screen instructions to perform INLINE
testing. Follow the steps and wait for the RWC1000
directions. The tester will tell you when it is time for
the next step.