Triplett RWC1000K/RWC1000NP - Manual (Page 38)

EDIT NAME
36
NAMING / SAVING TEST RESULTS
To NAME a reading, you must fi rst complete any of the RWC1000's
cable tests. At the end of the test, press the DOWN arrow (labeled
"REVIEW/SAVE" or "SAVE") and the above screen appears. Select
EDIT TEST NAME.
For the purposes of learning the naming routine, select START
FRESH and follow the exercises on the following page. Once you
become profi cient with START FRESH, give the EDIT OLD routine a
try. It speeds creating names by allowing you to copy an "old" reading
name as the starting point for creating the next cable reading name.
See 2 pages ahead for more detail.
EXIT SCROLL SEL
REVIEW TEST
SAVE READING
RWC TEST PORT
EDIT TEST NAME
Select EDIT TEST NAME
to create a custom name
for the test results. Do
this before saving the
test in memory.
EXIT SCROLL SEL
CREATE TEST NAME
START FRESH
EDIT OLD NAME
Select START FRESH
to create a name from
scratch. Select EDIT OLD
to create a new name by
modifying the prior name.
It saves time.
Note: Creating a name (EDIT TEST NAME) for a test result is optional.
The RWC1000 automatically assigns a sequential number from 1 to 250
when SAVE READING is selected. If a name has been created using
EDIT TEST name, this name will also be stored with the sequential
number when SAVE READING is selected.