Triplett RWC1000K/RWC1000NP - Manual (Page 36)

12> 105'
COAX
EXIT MAP + TRACE
Press SAVE to either SAVE or NAME and SAVE the test. See
the next page for instructions. Press EXIT to discard the results.
At the beginning of the test, the far end of the cable should
not be connected to anything.
12> 105'
COAX
EXIT MAP + TRACE
COAX CABLE TESTING
CO
AX CABLES
34
The coax pair (pins 1
and 2) and length are
displayed. Select MAP
+ TRACE for wiremap
and tones
12> 105' = = = <12
EXIT SAVE
Coax Wire Map
A correct wire map
for a coax cable.
Is the cable OK? If the COAX CABLE TEST concludes with a wire
map display and no reported errors, the cable is error free.
Connect the coax
cable to the F
connector on the
Main Unit and se-
lect coax. The test
begins.