Netw orks – Triplett RWC1000K/RWC1000NP User Manual

Page 55

Text mode
Original mode

PORT BEACON: Use the Port Beacon to locate cable connections in
crowded areas. To activate the port beacon, move the cursor to PORT
BEACON and press SELECT. The Port Beacon is a link pulse that
the Main Unit sends to the receiving device every 3 seconds. The Port
Beacon causes the link LED to fl ash on the LAN device
allowing you to spot the connection

PORT BEACON

SCAN ONE PORT
MONITOR INLINE
SEND BEACON

EXIT SCROLL SEL

Scroll down and se-
lect SEND BEACON

NETW

ORKS

USE RIGHT JACK

(PoE PROTECTED)

Network Testing / SEND BEACON

SEND BEACON

Locate cable drops by

lighting a link LED