Triplett RWC1000K/RWC1000NP - Manual (Page 6)

The RWC1000 List of Functions
UTP CABLES. Real World Certifi cation Level 1 tests:
✔ Length measurement of each cable pair.
✔ Locates opens, shorts and distance to the fault.
✔ Locates split pairs and the distance to the split.
✔ Wire map. Graphs cables internal pairing.
✔ NEXT (near end) and FEXT (a far distance) crosstalk.
✔ Propagation delay (time for data to travel the length of the cable).
✔ Skew (time delay between pairs).
✔ Cable typing. CAT 3, 5, 5E, 6.
✔ Speed Projection: Displays test results as a graph
projecting the cable’s speed capability (up to 1 GIGABIT).
UTP CABLES. Real World Certifi cation Level 2 tests. Adds:
✔ Attenuation. Graphs level of real live data from PC, hub or switch.
✔ Speed Certifi cation (Level 2). Enhanced speed display samples
real live data on active pairs to the limit of the device (1 Gig).
Note: Level 2 tests use real data from your hub, switch or PC.
COAX CABLES:
✔ Length, open, shorts, distance to fault, tone and wire map.
NETWORK DEVICE TESTING:
✔ Single Sided and INLINE port tests check the ability of the hub,
switch or PC to communicate by displaying their advertised and
negotiated capabilities.
✔ Data signal strength. Single sided test exercises the suspect hub,
switch or PC and displays the data signal strength of active pairs.
NAMING TEST RESULTS, PRINTER AND TONER PROBE:
✔ Naming tests. Test names can be up to 16 characters each.
✔ Toner/probe. Includes a full featured toner/probe. Tones coax and
all 4 UTP pairs to locate wires in crowded wiring closets.
✔ Printer memory. Stores test results for up to 250 UTP and coax
tests for later printing (requires a PC with Excel
® ). USB data
transfer cable and software included.
4