Teac US-366 - Manual (Page 12)

12
TASCAM US-366
3 − Installation
5. Click the “Install the Driver” button when the screen below
appears.
6. Read the contents of the License Agreement, and select “I
accept the agreement” if you agree to the terms. Next, click
the “Install” button to start installation.
7. When the screen below appears, use the supplied USB cable
to connect the unit to the PC.
USB
Computer
8. When the screen below appears, the installation is complete.
Click the “Reboot now” button to restart the PC to use the
driver.
Installing the driver for Mac OS X
NOTE
• Install the driver on the computer before connecting the unit
to it with the USB cable. If the USB cable is connected, cancel
driver installation and disconnect it before starting driver
installation again.
• During driver installation a warning message such as
“'TASCAM_US-322_US-366_X.XX' can't be opened because
it was not downloaded from the Mac App Store.” might
appear. If a message like this appears, follow the instruc-
tions in “Working with Gatekeeper” on page 13 and then
proceed with the installation.
8 Driver installation procedures
1. Download the latest driver for the operating system you are
using from the TEAC Global Site (http://teac-global.com/)
and save it on the computer to be used with the unit.
2. Double-click TASCAM_US-322_US-366_Driver_X.XX.dmg,
which is the downloaded and saved disk image file, and
double-click “TASCAM US-322 US-366 X.XX” inside the folder
that opens. Do not connect the unit to the computer before
the drivers are installed.
NOTE
Depending on the computer’s settings, the downloaded
dmg file might not have opened automatically. In this case,
open the dmg file first and then double-click the disk image
file.
3. After the installer launches, follow the instructions on the
screen to proceed with the installation.