Teac DP-008EX - Manual (Page 91)

TASCAM DP-008EX
91
17 – Commonly-used Functions
How to Execution method (buttons used) For details see
Cut and close up part a track TRACK EDITeCUT “CUT (remove part)” on page 59
Remove a section of a track and
replace it with silence
TRACK EDITeSILENCE “SILENCE (part erase)” on page 60
Make a copy of a track TRACK EDITeCLONE TRACK
“CLONE TRACK (track duplication)” on
page 60
Export a track's contents to PC
MENUeIMPORT/EXPORT
e
EXPORT TRACK
“Exporting tracks” on page 80
Bounce tracks
BOUNCE/MIXDOWN/MASTERING
e
BOUNCE
“Bouncing tracks” on page 51
Format one partition MENUeCARDeREFORMAT
“Reformatting MTR partitions” on
page 73
Restore a song from a computer MENUeDATA BACKUPeSONG
RESTORE
“Song backup and restoration” on
page 77
Ping-pong (bounce) to ohter
tracks
BOUNCE/MIXDOWN/MASTERING
e
BOUNCE
“Bouncing tracks” on page 51
Metronome settings METRONOME “Metronome” on page 69
Use the metronome METRONOME “Metronome” on page 69
Find out how much time is left
for recording
MENUeINFORMATION
“Viewing song information” on page
39
Playback a created stereo master
track
BOUNCE/MIXDOWN/MASTERING
e
MASTERING
“Checking stereo master tracks” on
page 64
Use mastering effects on a
stereo master track
BOUNCE/MIXDOWN/MASTERING
e
MASTERING
“Mastering stereo master tracks” on
page 64
Use the built-in mic INPUT SETTING/EQ/DYN
“Selecting the input source” on page
42
Record a guitar INPUT SETTING/EQ/DYN
“Selecting the input source” on page
42
Change the track to which
INPUT A/B is assigned
ASSIGN “Assigning inputs” on page 44
Change the repeat interval used
during repeat playback
MENUePREFERENCE
“Setting the time between repetitions
(repeat interval)” on page 54
Use the automatic power saving
function
MENUePREFERENCE
“Automatic power saving function” on
page 70
Change the display contrast MENUePREFERENCE “Adjusting the contrast” on page 36
Use reverb REVERB “Reverb” on page 61
Use equalizer on an input signal INPUT SETTING/EQ/DYNeF2
“Using the input equalizers” on page
44
Use a dynamics effect on an
input sound
INPUT SETTING/EQ/DYNeF3
“Using input dynamics effects” on
page 45
Use equalizer on a track EQ “Track equalizers” on page 61
Use phantom power PHANTOM “Phantom power” on page 42
Mute the track playback sound REVERB + EQ “Muting tracks” on page 62