Teac DP-008EX - Manual (Page 23)

TASCAM DP-008EX
23
2–Quick Start Guides
7. Press the F3 [EXEC] button to start automatic
mastering.
NOTE
If off-line peak detection has not yet been
conducted for the stereo master track that is being
automatically mastered, a
Peak Detect
pop-up
message appears to show that off-line peak
detection is being conducted.
When off-line peak detection completes, the
following pop-up message appears. Press the F3
[YES] button to start automatic mastering.
Press the F4 [NO] button to cancel automatic
mastering and return to the
AUTO MASTERING
screen.
8. When automatic mastering completes, the
AUTO
MASTERING
screen reopens with the
TYPE
set to
OFF
.
9. When you are done mastering, press the
BOUNCE/MIXDOWN/MASTERING button to
open the
RECORDER MODE
screen.
10. Use the DATA wheel to select (highlight)
MULTI
TRACK
, and press the F4 [EXEC] button to return
to the
MULTI TRACK
recorder mode.
Transferring the stereo master track
to a computer
You can connect this unit to a computer using the
included USB cable and transfer the stereo master
track that you created in “Creating stereo master
tracks” on page 62 in order to, for example, burn it
to a CD.
For instructions about how to transfer a stereo master
track to a computer, see “Exporting stereo master
tracks” on page 81.
Shutting down the unit
When you are finished, shut down the unit.
1. Press the HOME button to open the Home
Screen.
2. Press and hold the button. Release it when
POCKETSTUDIO
appears on the screen.
The power turns OFF automatically after the unit
completes its shutdown process (saving various
information about operations conducted until
now).
Always follow this procedures to shut down the
unit properly.
CAUTION
If you remove the batteries, disconnect the power
cord or otherwise interrupt the power, the unit
cannot shut down properly and all recorded data
and settings that have been changed since the last
shutdown or song saving operation will be lost.
These data and settings cannot be recovered.