Teac US-122 - Manual (Page 25)

7 – A Sample Recording Session in Cubasis
TASCAM US-122 —
25
Overdubbing
To overdub more tracks, simply select
and enable additional tracks as you did
the previous ones, and repeat the proce-
dure. You can monitor the tracks you’ve
already recorded via the US-122’s out-
puts, while recording additional tracks
into Cubasis via the US-122’s inputs. Be
sure to assign each track to its own chan-
nel in the program’s internal mixer. For more information on Cubasis’ mixer
functions, including groups and output
assigns, please refer to the Cubasis man-
ual.
When overdubbing, you can also select
the Direct Monitor mode by using the
DIRECT MONITOR switch on the US-
122.