Teac US-122 - Manual (Page 11)

3 – Installation
TASCAM US-122 —
11
Installation under Windows
The US-122 drivers are available on the
CD as executable installers. You’ll find
two executable installer files in the
Driver folder on the disc, labeled as:
US122_Win9x_x_yy.exe (for Windows
98 Second Edition and Me (Millennium
Edition)) and as
US122_Win2k_x_yy.exe
(for Windows 2000 and Windows XP)
where
x and yy represent the version
numbers.
Note that we have also included the indi-
vidual driver files, available from the
root level of the CD. However, we rec-
ommend using the installers, as they will
also locate and uninstall any files per-
taining to older versions of the US-122
drivers.
NOTE
You should also check the TASCAM Web
site to determine the latest version of the
drivers. If necessary, download and install
these latest drivers, following the instruc-
tions given here.
To install under Windows 98SE
or Me:
Note that the US-122 will run
under Windows 98 SE (Second Edition)
or Me (Millennium Edition). Due to its
limited USB capabilities, First Edition
Win98 is not recommended.
NOTE
Run the Installer with the US-122 NOT con-
nected to the computer.
1 Double click on the executable file
US122_Win9x_y_zz.exe (where y
and zz represent the version num-
ber). The installer will run.
2 Click the Setup button. The
Welcome dialog box will appear.
3 Click the Next button. The driver
files will be installed to your hard
drive.
In some cases, the Add Hardware
Wizard may ask for the file
US122WDM.SYS . Should this occur,
click Browse and direct it to the
path Windows/System32/Drivers .
In some cases, the Add Hardware
Wizard may ask for your Windows
98 or Windows Me CD-ROM if it is
unable to find all the needed sys-
tem files. We suggest you have it
handy.
4 The Setup Complete dialog will
appear. Click Yes, I want to restart
my computer , followed by the Finish
button. The computer will reboot.
5 Connect the US-122 to the com-
puter. The Windows Plug and Play
system will notice a new USB
device and start the Add New
Hardware wizard, which will find
the needed files on its own. This
will take about 30-60 seconds.
The drivers are now installed and the
US-122 is ready to operate.
NOTE
If you are running Windows 98SE, you may
need to install the appropriate Microsoft
Hotfix #Q269601.