Teac MX-2424 v1.04 - Manual (Page 48)

920 LED Brightness
This Menu Utility adjusts the brightness of the LED’s and Meters on the MX-2424.
940 Machine Name
This Menu Utility allows you to name your MX-2424 with up to a ten-character name. This menu is used to
distinguish multiple units when using ViewNet on a network.
930 Machine I.D.
This displays the ID number of your MX-2424 that would be displayed in ViewNet. It is not possible to change it.
950 IP Address
With this Menu Utility it is possible to set the IP Address to suit individual network needs. The first nine numbers
of this address must be the same on all TASCAM hard disk recorders and network computers on the same network.
Individual machines are determined by the last three numbers, which must be unique to each machine and computer
on a network. (NOTE: if you attach your MX-2424 to a local network please make sure your IP settings do not
conflict with another device on the network.) Please refer to the ViewNet Manual for more detail.
951 IP Net Mask
This Menu Utility is used to enter the IP Net Mask. This should be set to 255.255.255.000 and should not be
changed unless your network administrator advises that a different setting should be used. Please refer to the
ViewNet Manual for more detail.
952 IP Gateway
This Menu Utility is used to enter the IP Gateway. This value is factory preset to 000.000.000.000 and should not
be changed unless the ViewNet network is part of a larger network which uses a Gateway. If there is no Gateway in
use, there is no need to enter any data in this menu. Contact your network administrator if you are unsure.
990 Software Version
This displays the version number of the software currently installed in the MX-2424.
995 Save S/W To Card
This Menu Utility allows the firmware in the MX-2424 to be stored to a TL Media card inserted in the TL Media
Slot [22]. (Please refer to MX-OS Operations for details.)
999 Copyright ©
TimeLine 2000
48