Teac MX-2424 v1.04 - Manual (Page 14)

[60] MIDI In/Out/Thru:
The MIDI In connector will allow the MX-2424 to lock to MIDI time code for chase play and record. The MX-
2424 will also respond to standard MIDI machine control messages for play, track arm, record, rewind, fast forward,
stop, jog/shuttle and scrub. NOTE: When slaved to incoming MIDI time code it may be necessary to also lock the
MX-2424 to the digital clock of the device that is sending the MIDI time code.
The MIDI Out connector will generate MIDI time code that corresponds to the current position of the play head
including any offset.
The MIDI Thru connector will pass the MIDI information present on the MIDI In connection through the MX-2424
unaltered.
[64] IEC 3-Prong AC Connector:
This is where the power cord goes.
14