Teac MX-2424 v1.04 - Manual (Page 31)

Pressing [19] then NUDGE [39] with no tracks selected for editing will reference
track number one for capturing events that are under the playhead. If more than one track is selected the IN and
OUT points will surround the event on the lower numbered track. For example: If tracks 5 & 7 were edit-enabled
and the playhead was positioned in events on both tracks, the IN and OUT points would surround the event on track
5. If the Play Head is not located in an audio event on the edit-enabled track, then the In and Out points will not
change.
[40] TRIM
Activates a mode in which SCRUB/SHTL [42] inner wheel rotation and UP/DOWN [41/43] arrow keys change the
time code value or Menu setting in the bottom of the LCD [18]. The SCRUB/SHTL [42] outer ring moves the
cursor left or right in the display. Pressing TRIM [40] again exits Trim Mode saving changed time code entries
while pressing STORE [20] is necessary so save Menu settings.
[41, 43] UP AND DOWN
These keys are used to scroll up and down through Setup Menus, change Menu settings, trim time code values and
Nudge audio events.
[44] SETUP/TEMPO
This key places the MX-2424 in Setup Mode where Menus for operating parameters can be viewed and adjusted.
When Setup is active the LCD [18] will display the text for the specific menu item. The UP/DOWN [41/43] keys
or the SCRUB/SHTL [42] inner wheel will scroll through the menu items, then pressing TRIM [40] will allow
parameter adjustment of that menu item using the UP/DOWN [41/43] keys or the SCRUB/SHTL [42] inner wheel.
Tempo Maps will be implemented in an upcoming version of MX-OS. Documentation accompanying that version
will provide a description of this feature.
[45] PROJECT/NEW
Press PROJ [45] to access Project and Track file management functions such as Load, Delete, Rename, Smart Copy
and TapeMode Convert. (Please refer to Disk Operations/Project Functions for more detail.)
Pressing [19] then PROJ [45] immediately activates Menu 800 where a new Project may be
created by entering a new and unique Project name. If a project is already loaded into the MX-2424 a new project
name will automatically be created that is the same as the loaded project with an additional numerical suffix.
(NOTE: While this function is not intended for renaming an existing Project it can be used as a “Save As…”
function. To rename an existing Project the Rename function under the PROJ key must be used.)
[46] VIEW/UNLOAD
Pressing VIEW [46] will display for viewing, the contents of the selected track in the LCD [18]. The selected track
is indicated by a rapidly flashing SEL LED. Different tracks may be selected with the Individual Track Selection
Keys [4], the SCRUB/SHTL [42] inner wheel or the UP/DOWN ARROW [41,43] keys.
Pressing then VIEW will unload the track selected with the VIEW [46] key from the
physical playback track of the MX-2424. (Please refer to Advanced Operations for more detail.)
[23] Front Panel Expansion Bay
This standard size 5 ¼ inch slot will allow the installation of a SCSI device in addition to the included hard drive
that is housed inside the MX-2424. (See Option Installation for more details.)
31