Teac PT-7 - Manual (Page 36)

36 TASCAM PT-7
Changing the speed without changing the
pitch during playback
1 Press the bottom MODE key repeatedly until
the marker appears next to SPEED .
2 Use the + and – keys to adjust the playback
speed. The speed can be changed in a range
from 50% (half-speed) to 150% in 10%
increments.
Press the + and – keys at the same time to
restore the original speed (100%: default
value).
3 Press the HOME key to return to the Home
Screen.
Loop playback
1 Confirm that the loop indicator is not shown.
If it is shown, press the IN/OUT key until it
disappears.
2 Press the IN/OUT key during playback to set
the loop IN point. The left side of the loop
indicator lights for the IN point underneath
the play position bar on the display.
3 Press the IN/OUT key again to set the loop
OUT point. After the loop OUT point is set,
6 – Using the recording and playback functions