Teac PT-7 - Manual (Page 13)

TASCAM PT-7 13
NOTE
Due to the characteristic of the built-in speaker,
some sound might be difficult to hear even if you
turn up the volume.
2 REC indicator
This lights during recording.
3 Display
This shows various types of information.
4 MODE keys
Use these to change the TUNE (tuner),
METRONOME and PB CONT (playback
control) functions.
5 START/STOP key
Press this to start and stop the metronome.
When tuning, press it to start and stop
output of the standard pitch from the built-in
speaker.
6 IN/OUT key
When playing back a recorded track, press to
set and cancel loop playback starting (IN) and
ending (OUT) points.
7 LOOP key
Press to enable and disable loop playback
when playing back a recorded track.
8 MIC
Use this built-in monaural microphone for
recording and the pitch trainer functions.
NOTE
When a contact mic or other device is connected to
the INPUT jack, the built-in mic is disabled. When
you want to use the built-in mic, do not connect
anything to the INPUT jack.
9 TAP +/– keys
Use these to set various internal setting
parameters.
0 STOP key
Press to stop recording or stop the playback of
a recorded track.
q PLAY key
Play a recording.
w RECORD key
Press this key during playback or when
2 – Names and functions of parts