Teac PT-7 - Manual (Page 31)

TASCAM PT-7 31
3 Press the HOME key to return to the Home
Screen.
Starting and stopping the
metronome
Press the START/STOP key to start and stop
the metronome.
Use the SPEAKER switch on the rear panel
to set whether or not the metronome sound
is output from the built-in speaker.
When the metronome is started, the
metronome sound is output from the speaker.
At the same time, the beat indicators on the
display move in time with the rhythm.
Use the VOLUME dial to adjust the volume.
Changing the metronome sound
This unit has two types of metronome sounds.
1: Acoustic sound
2: Electronic sound
Press and hold the second
MODE key from
the top and press the + or – key to show
the current metronome sound. Continue
pressing the MODE key, and press the + or –
key again to change the metronome sound.
5 – Using the metronome