Teac PT-7 - Manual (Page 15)

TASCAM PT-7 15
t STANDBY switch
Use this switch to turn the trainer’s power ON
and STANDBY .
STANDBY : Turns the power to standby.
ON : Turns the power on without illuminating
the LCD with the backlight.
BACK LIGHT : Turns the power on and
illuminates the LCD with the backlight.
y INPUT GAIN switch
Set this to suit the level of the signal input to
the INPUT jack.
If the input volume is quiet set this to HIGH ,
and if it is loud set this to LOW .
u SPEAKER switch
Use this to turn the built-in speaker ON and
OFF.
Left side panel
i PHONES jack
Use this to connect headphones.
o VOLUME control
Use this to adjust the volume of the
headphone and the built-in speaker output.
p INPUT jack
Connect an external contact mic, for example,
to the unit here to input sound.
NOTE
When a contact mic or the other device is •
connected to the INPUT jack, the built-in mic is
disabled. When you want to use the built-in mic,
do not connect anything to this jack.
2 – Names and functions of parts