Teac MMR-16 v4.0 User Manual
Page 137
TASCAM MMP-16 Owner’s Manual • Appendix D • Cable Information
139
WORD CLOCK IN Connector
NOTES:
1. BNC, 75 Ohm Terminated. TTL logic levels.
WORD CLOCK OUT Connector
NOTES:
1. BNC, 75 Ohm Drive Capability. TTL logic levels.
VIDEO IN/OUT Connector
NOTES:
1. BNC, Video is connected in parallel between connectors.
2. 1K Ohm input impedance. Supports Composite, Color Bars, Black Burst.
Should be 75 ohm terminated if at end of cable.
SERIAL CONNECTORS
NOTES:
1. These connectors are for factory diagnostics only.
2. 9-pin D-subminiature female connector (DB-9), connected to COM1 on the
motherboard.
3. 25-pin D-subminiature female Connector (DB-25), connected to COM2 on the
motherboard.
SCSI Connector
NOTES:
1. SCSI-2 Compliant.
PRX Connector
NOTES:
1. 3.5 mm Stereo Phonejack.
2. Same audio signal as on Headphone Monitor, but audio on tip
(left channel) only.