Teac HS-P82 - Manual (Page 50)

50
TASCAM HS-P82
Manual locate function
You can directly input a time and locate to it. Touch the
Manual Locate
button on the Home Screen to open the
MANUAL LOCATE
screen. Touch the
FRAME EDIT
button to
set whether or not the frame value can be edited. The first
screen below shows this option ON, and the second shows
it OFF.
There are three locate modes.
ABS: Input an actual time and locate to it.
+: Input an amount of time to go forward from the current
time and locate to the new time.
–: Input an amount of time to go back from the current time
and locate to the new time.
Input the time using the number buttons. You can also select
a number field and use the
DATA dial to adjust the time.
Press the
LOCATE
button to locate to the new time and return
to the Home Screen.
Touch the
CLEAR
button to reset the input values.
TIP
You can use a PS/2 keyboard to set these values. Press the
Enter key to confirm and press the ESC key to reset all the
digits to 0.
7 – Mark and Locate Functions