beautypg.com

2 − names and functions of parts – Teac HS-P82 User Manual

Page 15

background image

TASCAM HS-P82

15

PAN/LVL Screen, Playback

Information Screen, Playback

0

Recording media

This shows which of the two CF slots is being used,
as well as the remaining recording time for the current
sampling frequency, bit rate and number of recording
tracks. The background of the media that is currently
being used appears green during playback and red when
recording. If there is no media in the slot, dashes are
shown and the background is grey.
If the card has no project,

NoProject

appears. When

a CF card is inserted during recording into an empy,
unused slot,

UNMOUNT

appears. When recording is

stopped, either the remaining recording time or

NoProj-

ect

appears.

When an unformatted CF card is inserted,

UNFORMAT

appears.
Press this part of the screen to open the

CF

SELECT

screen (media selection screen). (See “Formatting a CF
card” on page 23.)

q

REC TRACKS button

Press this button to show the record function buttons and
the buttons to edit the take number (Next Take).

Next Take
The take number can be set using one letter from the
alphabet and a number from 1 to 999. Touch the alphabet
area (it becomes yellow) and use the +/- buttons or the

DATA

dial to change the value. Press the number area to

highlight it in yellow and turn the

DATA

dial to change

the value.

In solo mode, the alphabet and the number area cannot
be selected.
When the unit is put in recording standby, the file name
of the take to be recorded is shown above the scene/take
name button on the Home Screen.
In the following cases,

---

appears and the value cannot

be changed.

No project or scene is loaded

The selected CF card is unavailable

The current take is 999

w

PAN/LVL button

Press this button to open a screen with pan pots and
level adjustments for stereo mix recording and the
output signal from

PHONES

and

LINE OUT

.

If you press a

PAN

or

2MixLVL

knob on a channel, the

parameter can be controlled with the

DATA

dial.

If two channels are linked, the

PAN

knob functions as a

balance adjustment knob.
When in solo mode,

PAN

or

2MixLVL

knob cannot be

selected.

e

INFO button

Press this button to show the current settings of the unit
and information about the loaded file.

The

Sys.

Info

screen shows the current settings of this

unit. Touch this part of the screen to open the

SYNC

T/C

screen.
The

File

Info

screen shows information about the

currently loaded file. Touch this part of the screen to
open the

PROJECT

screen.

r

Mark List button

Press this button to open the mark list. (See “Mark list
screen” on page 48.)

t

Manual Locate button

Press this button to open the screen for locating
manually. (See “Manual locate function” on page 50.)

2 − Names and functions of parts