Teac HS-P82 Quick Start Guide - Manual (Page 4)

Page 4 of 38
activate the Mirror Record function. I recommend that you use two compact flash cards of the same
manufacture and read/write specs to insure the best results. Error messages may occur otherwise; as
well as if there is not enough memory remaining on one of the cards. The Home screen shows the status
of both CF cards.
System Setup
From the MENU button, select the SYSTEM SETUP screen.
Keyboard type: US.
Solo mode: The default setting for SOLO is SINGLE. That means only one channel at a time can be solo
monitored. If you change the solo mode to MIX, then it is possible to highlight and monitor as many
channels simultaneously as you want to. MIX is better for film/video applications.
Slate type: you will find yourself alternating between Internal Mic for voice slating your takes, and the
TONE setting for recording a head tone at the beginning of your recording session. When you press the
SLATE button on the face of the recorder, it will activate the slate mic or tone generator, based on your
selection on this screen.