Mark function, Adding marks manually to a recording, Moving to a mark position – Teac DR-2D User Manual

Page 48: 4–recording

TASCAM DR-2d

Mark function

Adding marks manually to a recording

You can manually add marks to a recording where you want
them.
Press the ENTER/MARK key while recording to add a

mark.
Mark number pop-up appears.

NOTE

A mark is automatically added when you restart recording

•

after temporarily pausing.
Mark information is stored in the file with numbers

•

between 01–99. The maximum number of marks in a file

is 99.

Moving to a mark position

You can move to marks in the currently selected file when
paused and during playback.

You can use this function to identify points to create shortcuts to
the beginning of songs, for example.
Press the Â/¯ keys while pressing and holding the

ENTER/MARK key during playback or when stopped.

NOTE

You cannot move to a mark in a different file.

Recording the moment before pushing

RECORD (PRE REC)

By using prerecording, when the unit is in recording standby
you can record up to two seconds of the signal input before the
RECORD (º) button is pushed to start recording.
1 Press the MENU key to open the

screen.

2 Use the wheel to select

REC SETTING

, and press the

ENTER/MARK key.

3 Use the wheel to select

PRE REC

and press the ¯ key

or ENTER/MARK key.

4–Recording

This manual is related to the following products:

DR-2DW