Teac DR-2D - Manual (Page 46)

46
TASCAM DR-2d
3 Use the wheel to select the
MODE
and press the ¯ key
or ENTER/MARK key.
4 Use the wheel to select ON .
5 Press the  key to select the other item
6 Use the wheel to select
START LEVEL
and press the ¯
key or ENTER/MARK key.
7 Use the wheel to select the level that signal is judged to
have been input when it exceeds this level.
Set the value to one of the following selection.
-6dB /- 12dB (default)/ -24dB / -48dB
8 Press the /HOME [ª] key to return to the Home
Screen.
9 Press the RECORD (º) key to put the unit into
recording standby.
Recording starts automatically when the input signal
exceeds the
START LEVEL .
If the input volume drops below the set level for 5 or more
seconds, recording pauses automatically.
10 Press the /HOME [ª] key to stop automatic
recording.
CAUTION
Overdub recording is not possible when using the AUTO REC
function.
Creating new files (track incrementing)
You can manually or automatically split a recording by creating
a new file.
Creating new files manually while recording
You can manually split a recording by creating a new file.
Press the ¯ key while recording.
NOTE
When new files are created, incremental numbers are added
to the end of each file name.
4–Recording