beautypg.com

Inserting and removing sd cards, Inserting the sd card, Removing the card – Teac DR-2D User Manual

Page 29: 3–preparation

background image

TASCAM DR-2d

29

CAUTION

Always use the

/HOME [ª]

key to shutdown the unit.

Do not remove the batteries or disconnect the power cable

accidently while the unit is operating. If you do so, the unit

cannot shut down properly and all recordings, settings and

other data will be lost. Lost data cannot be restored. We

recommend that you also save the data manually often.

Inserting and removing SD cards

Inserting the SD card

1 Open the SD slot cover on the left side panel.

2 Insert the SD Card into the slot as shown in the following

illustration until it clicks into place.

NOTE

An SD card is already installed when the unit is shipped from

the factory. If you want to use this card to record and play

tracks, there is no need to reinstall it.

Removing the card

1 Open the SD slot cover on the left side panel.

2 Push the SD card in gently and it should eject.

CAUTION

Do not remove the SD card from the unit when it is

connected to a computer by USB.
SD cards that meet SD or SDHC standards can be used with

this unit.
A list of SD cards that have been confirmed to work with

this unit can be found on our website (http://www.tascam.

com).

3–Preparation

This manual is related to the following products: